| LED | State | Description |
| POWER | Solid Green | Power is On |
| Flashing Green | Router is performing POST. |
| Solid Red | Router failed POST (Power On Self Test) or Device Malfunction.
Note: The Power LED should be red no longer than two seconds after the power on self test passes. |
| OFF | Power is OFF. |
| BROADBAND | Solid Green | VDSL2 link established. |
| Flashing Green | VDSL2 attempting to synchronize |
| Solid Red | Router failed to synchronize |
| OFF | Router power is OFF or no VDSL2 signal detected. |
| INTERNET | Solid Green | Internet link established. VDSL2 link is Up, and the Router has a WAN IP address from IPCP or DHCP; or a static IP is configured; or PPP negotiation has successfully completed (if used) and no traffic is detected. |
| Flashing Green | IP connection established and IP Traffic is passing through device (in either direction). Note: If the IP or PPP session is dropped due to an idle timeout, the light will remain solid green, if a VDSL2 connection is still present. If the session is dropped for any other reason, the light is turned OFF. The light will turn red when it attempts to reconnect and DHCP or PPP fails. |
| Solid Amber | Router has attempted and failed to establish IP connectivity (no DHCP response, no PPP response, PPP authentication failed, no IP address from IPCP, etc.). |
| OFF | Router power is OFF; or Router is performing POST; or Router is in Bridge Mode; or Router has not attempted Internet connectivity. |
| WIRELESS SETUP | Solid Green | Wireless link established. |
| Flashing Green | Wireless LAN activity is present (traffic in either direction). IP connection established and IP traffic is passing through device (in either direction). Note: If the IP or PPP session is dropped due to an idle timeout, the light will remain solid green, if a VDSL2 connection is still present. If the session is dropped for any other reason, the light is turned OFF. The light will turn red when it attempts to reconnect and DHCP or PPP fails. |
| OFF | Router power is OFF; no wireless link; or wireless Easy Config not active. |
| 1,2,3,4 (Ethernet LAN) | Solid Green | Powered device is connected to the associated port. |
| Flashing Green | 10/100 Base-T LAN activity is present (traffic in either direction). |
| OFF | Router power is OFF, or no cable or no powered device is connected to the associated port. |
| COAX | Solid Green | A physical connection has been established. |
| Flashing Green | Activity is present on the Coax link. |
| OFF | Router power is OFF. |
| WIRELESS | Solid Green | Wireless link established. |
| Flashing Green | Wireless LAN activity is present (traffic in either direction). IP connection established and IP traffic is passing through device (in either direction). Note: If the IP or PPP session is dropped due to an idle timeout, the light will remain solid green, if a VDSL2 connection is still present. If the session is dropped for any other reason, the light is turned OFF. The light will turn red when it attempts to reconnect and DHCP or PPP fails). |
| Solid Red | Device attempted to become IP connected and failed (no DHCP response, no PPP response, PPP authentication failed, no IP address from IPCP, etc.). |
| OFF | Router power is OFF or No wireless link. |