Residential Support
FiOS TV
 Search
open dropdown
 General Support   Guide   Receivers   Remote Controls   Other Hardware   Troubleshooting  
FiOS TV Solution Center
Programming your Philips RC144 Remote
printer friendly version | email this page | bookmark this page
To set up your Philips RC144 remote, follow the steps below:
  1. Find the device codes for the devices you want to set up. You can find the latest codes below:

    Codes
    Televisions
    DVDs
    VCRs
    Audio Receivers
    Audio Amplifiers

    In addition, device codes are listed in the Philips RC144 Remote Control User Guide.


  2. Write down the device codes for the devices you want to set up.

  3. Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.


  4. Press and hold the appropriate device button and press OK.


  5. Release both buttons. The device buttons blink twice.


  6. Enter the device code for the device (if there is more than one device code listed for your equipment, start with the first device code in the list).


    7. The device button blinks three times.

  7. Point the remote at the device and press the Power button.


    8. Did the device turn off?
    Yes: Keep the code you wrote down above for future reference. You may need it again if the device code is accidentally erased.
    No: Repeat these steps using the next device code listed for your equipment.

    Note: If none of the listed codes work for your equipment, you can use your remote to manually search for a valid code.


  8. Repeat this procedure for each device you want to program into your remote control.



red arrowDo you need more help? red arrowFiOS TV Contact Us

Show Me Support For

grey arrowFiOS TV
Ask Verizon
Forums - NEW!

Exchange experiences, tips, information and techniques related to Verizon products and services.

> Click Here
FiOS TV Tools

Online Ordering
 
Programming your Philips RC144 Remote]]>