Support

Overview Internet TV Phone Wireless

Search for Support in Select Internet TV Phone Wireless All Search Popular Searches: 7500 Gateway , actiontec

General Support Email Billing Account Tools Networking Setup Troubleshooting User Guides Troubleshooting

Feedback| Email Print Bookmark VersaLink 7500 Troubleshooting Summary Chart Use the diagnostic LED lights on your Westell VersaLink 7500 gateway and the chart below to troubleshoot connection issues. LED State Description POWER Solid Green Router power is ON. OFF Router power is OFF. Solid Red POST (Power On Self Test), Failure (not bootable) or Device Malfunction. Note: The Power LED should be red no longer than two seconds after the power on self test passes. E1, E2, E3, E4 (Ethernet LAN) Solid Green Powered device is connected to the associated port (includes devices with wake-on LAN capability where slight voltage is supplied to an Ethernet connection). Note: When using the optional uplink port (E1), Ethernet LAN connection is limited to E2, E3, and E4. Flashing Green 10/100 Base-T LAN activity is present (traffic in either direction) OFF Router power is OFF, no cable or no powered device is connected to the associated port. Solid Green Link Established. WIRELESS Flashing Green Wireless LAN activity is present (traffic in either direction). OFF Router power is OFF or No Link. Solid Green USB link established. USB Flashing Green USB LAN activity present (traffic in either direction). OFF No USB link established. Solid Green Good DSL link. DSL Flashing Green DSL attempting to sync. Solid Amber Modem is in safe boot mode. OFF Router power is OFF. Solid Green Internet link established. With DSL up, the Router has a WAN IP address from IPCP or DHCP; or a static IP is configured; or PPP negotiation has successfully completed (if used) and no traffic is detected. INTERNET Flashing Green IP connection established and IP Traffic is passing through device (in either direction). Note: If the IP or PPP session is dropped due to an idle timeout, the light will remain solid green, if an ADSL connection is still present. If the session is dropped for any other reason, the light is turned OFF. The light will turn red when it attempts to reconnect and DHCP or PPP fails). Solid Red Device attempted to become IP connected and failed (no DHCP response, no PPP response, PPP authentication failed, no IP address from IPCP, etc.). OFF Router power is OFF, Router is in Bridge Mode, or the ADSL connection is not present. High Speed Internet Contact Us

Edit My Preferences Internet: High Speed Internet TV: FiOS TV Recently Viewed Forums - New! Exchange experiences, tips, information and techniques related to Verizon products and services. Ask Verizon Your automated customer service agent Ask Now Repair Status To view, update or cancel your repair request enter your phone or data line number. Phone Number Check with user name User Name @verizon.net Check with phone number Order Status View order progress, connection date and more Check Order Status My Account Update my account settings Check email Personal Webspace Broadband Essentials & Extras Verizon Surround Site Builder System Tools Verizon Online Password Reset High Speed Internet Speed Test High Speed Internet Speed Optimizer Service Checkup Announcements Get in Touch Contact Us by email, live chat or phone Locate a Verizon Store in your area