|
![]() D-Link 2750B Gateway More Help: Troubleshooting Restore Factory Settings Port Forwarding Create Wireless Network SSID | WEP | WPA or WPA2 |
Note: The D-Link 2750B Gateway security screens and prompts may vary slightly from these directions depending on when you purchased your gateway and the firmware loaded on it.
To change your D-Link 2750B Gateway password:
-
Open your Web browser and enter http://192.168.1.1 in the Address field
-
Click the Settings tab.
-
Enter your user name and password and click Continue. Your default user name is admin if you didn't change it when you configured your network.
-
Click the System tab.
-
From the sub-menu, click Users.
-
Under the Full Name heading, click Administrator. The Administrator information is displayed.
-
Enter a new password in the New Password field.
-
Enter your new password again in the Retype New Password field to confirm that you entered it correctly
-
Click OK. A warning page opens.
- Click OK to save your changed user name and password. Note: You may be asked to log in using the new password.


