Verizon Support
Verizon Support

In-Home Agent Close

Try the In-Home Agent

Have it? Use it!

Need it? Get it!

Fast, easy 24/7 solutions- right on your desktop.
Customers With Disabilities
  • RESIDENTIAL
  • BUSINESS

    Verizon Business Sites

  • WIRELESS
Home
  • QuickGuides
  • TV
  • Internet
  • Phone
  • Home Control
  • Billing & Account
  • Forums
  • My Support
  • Contact Us
    •

    High Speed Internet

    I want to:

    Topics

    More help

  • Print
    • Actiontec GT784WNV: Resetting to Factory Defaults
    When you reset your Actiontec GT784WNV settings, remember:

    • Your default SSID and network encryption key is also restored.
       

    • If you have a home network, you must re-configure your Actiontec GT784WNV to match the previous settings that were assigned to all the other devices on your wireless network. Otherwise, no other network devices will be recognized.
    actiontec image
    ActionTec GT784WNV

    More Help:
    Troubleshooting | Port Forwarding 
    Change gateway password
    Create Wireless Network
    SSID | WEP | WPA or WPA2
    Note: The Actiontec GT784WNV security screens and prompts may vary slightly from these directions depending on when you purchased your gateway and the firmware loaded on it.

    To reset your Actiontec GT784WNV to factory default settings:
    1. Open your Web browser and enter http://192.168.1.1 in the Address field.
       
    2. Enter your user name and password and click Continue. Your default user name is admin if you didn't change it when you configured your network.
       
    3. From the top navigation, select Utilities.
       
    4. From the Modem Utilities navigation, select Restore Defaults. From this screen you can restore the Gateway’s wireless settings, firewall settings or all settings to their factory default state.
       
    5. Press the appropriate button to restore your settings. During this process, the Gateway’s Power Light flashes and the Gateway is disabled until after rebooting.Your Actiontec GT784WNV is now using the default settings for the network configuration.
    If you cannot access the gateway’s internal interface, perform the following steps:
    1. Using a paperclip, press in and hold the Reset button for 30 seconds.
       
    2. After 30 seconds, release the Reset button and turn the power off to the D-Link 2750-B.
       
    3. Leave the power off for 20 seconds.
       
    4. Turn your gateway back on.
       
    5. Reboot your computer.
       
    Privacy SettingsAccept CookiesAccept Cookies
    Contact Us
    Verizon SignIn Alerts

    Sign in

     

    for personalized, convenient support

    What's this?
    Did you know?

    Many equipment problems can be fixed in less than
    5 minutes!

    Make sure your equipment is plugged in and that the power is working in the rest of your house

    Verizon

    • Services
    • Shop
    • Support
    • Site Feedback
    • Announcements

    Shop FiOS

    • FiOS Internet
    • FiOS TV
    • FiOS Digital Voice
    • FiOS Bundles
    • Flex View

    Shop Standard Services

    Account & Services

    Email, News, & TV

    • Check Email
    • TV Listings

    Support