These instructions are for the Verizon P265 remote control. If this is not the model of your remote, find the instructions for your model on the FiOS TV remote controls & codes page.

If you've tried the remote code listed for your TV and it did not work, or the remote code is not listed, you can search for a valid code to set up your remote.

Search for a valid code and set up your remote

1. Turn on your TV and the FiOS TV Set-Top Box.
   Make sure you can see live TV.
   
   
2. Press and hold the OK and FiOS TV buttons together then release both buttons.
   The red LED light blinks 2 times and then stays on.
   
   
3. Press and hold the Play button.
   The remote control tries a new TV code every second.
   The red LED light blinks each time a new code is sent.
   
   
4. When the TV turns off, release the Play button immediately.
   
   NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
   
   
5. Test your remote to ensure it is working properly:
   - Turn on the TV by pressing the TV button on your FiOS TV remote.
   - Press the Vol+ and Vol- buttons to ensure that you can control the volume.
   - Press the Mute and A/V buttons to ensure they work.
   
   If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
   
   
6. If all the buttons work, press OK to this TV remote code.
   The red LED light blinks 3 times and then turns off. Your remote control is now programmed.