- From the Apple menu, select Control Panels, and then select Remote Access.
- In the Name field, enter VZ/ followed by your User Name (or your User ID).
- Enter your password in the Password field.
- Enter the local dial-up access number you selected in the Number field, and then click Options.
- On the Redialing tab, verify that Redial is set to Off. Select the Connection tab.
- Verify that Flash icon in menu bar while connected and disconnect if idle for 10 minutes are selected. Select the Protocol tab.
- Verify that the first three check boxes are selected, then click OK.
- Click Apple, Control Panels, TCP/IP.
- From Connect via select PPP.
- From Configure select Using PPP Server, and leave other fields blank.
- Select Options.
- Verify that Make TCP/IP is active and Load only when needed is selected, and then select OK.
- Click Apple, Control Panels, Remote Access.
- Click Connect.

