- Note: Resetting your router to the factory defaults not only changes your gateway user name and password to the factory default values, but it also deletes all your home network settings. This includes the SSID and network encryption key. After you reset your gateway to the factory defaults, your home network won't be accessible until you reconfigure your router and all your network devices to use the same SSID and network encryption key.
- Hold the reset button on the back panel of the VersaLink gateway for 30 seconds.
- All your settings will be lost including network encryption information, MAC Address filtering information, and any SSID information you have entered.
- The gateway user name and password will revert to the default of Admin as the user name and Password as the password.

- Your VersaLink 327W gateway is now using the default settings for the network configuration. This includes the default SSID and network encryption key. You must re-configure your VersaLink gateway to match your previous settings that were assigned to all other devices on your wireless network. Otherwise, no other network devices will be recognized.

