| ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
- Plug the Ethernet cable you just removed from your computer into the WAN port on the back of the router.

Rear view of the Linksys BEFW11S4 Series Router - Using a new Ethernet cable, plug one end into one of the numbered ports on the back of the router (1-4 or 1-8, depending on the model).
[Show Me] - Plug the other end of the new Ethernet cable into the back of your computer (where the cable coming from the modem was previously plugged in).
[Show Me] - Connect the power adapter to the power port on the back panel of the router.
[Show Me] - Plug the other end of the power adapter into an electrical outlet or power strip and verify that the Power light on the router is on (green). [Show me the power light]








